Configuring connection types
Some connection types need to be configured before they can be used to connect a phone and Nokia PC Suite.
If the Configure button is disabled (grey) when a connection type is selected, the connection type cannot and need not be configured. The infrared and USB cable (DKU-2, DKE-2, CA-53, CA-70 or CA-101) connection types need no configuration.
To configure serial (CA-42) connection types
-
Make sure that the serial (CA-42) connection type you want to configure is activated in Nokia Connection Manager.
-
Click Configure.
-
Select the correct COM port from the list. Click OK.
-
Close Nokia Connection Manager.
Note:
The CA-42 cable is connected to the USB connector of your computer and Windows recognises it as USB. However, in Nokia Connection Manager you have to select the serial cable connection type to monitor the CA-42 connection and define the COM port for the cable if necessary.
To configure the Bluetooth wireless technology connection type
-
Make sure that the Bluetooth wireless technology connection type you want to configure is activated in Nokia Connection Manager.
-
Click Configure.
-
Follow the instructions on the user interface to pair and authenticate the devices.
-
Close Nokia Connection Manager.